Saturn 2007 Outlook Specifications Page 241

  • Download
  • Add to my manuals
  • Print
  • Page
    / 538
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 240
CHANGE ENGINE OIL SOON
This message displays when the engine oil needs
to be changed. When you change the engine
oil, be sure to reset the CHANGE ENGINE OIL
SOON message. See Engine Oil Life System
on page 390 for information on how to reset the
message. See Engine Oil on page 387 and
Scheduled Maintenance on page 488 for more
information.
CHECK TIRE PRESSURE
This message displays when the pressure in one
or more of the vehicle’s tires need to be
checked. This message also displays LEFT
FRONT, RIGHT FRONT, LEFT REAR, or RIGHT
REAR to indicate which tire needs to be
checked. You can receive more than one tire
pressure message at a time. To read the other
messages that may have been sent at the
same time, press the set/reset button or the trip
odometer reset stem. If a tire pressure message
appears on the DIC, stop as soon as you can.
Have the tire pressures checked and set to those
shown on the Tire Loading Information label.
See Tires on page 425, Loading Your Vehicle on
page 353, and Inflation - Tire Pressure on
page 432. The DIC display also shows the tire
pressure values for the front and rear tires
by pressing the vehicle information button. See
“DIC Operation and Displays (With DIC Buttons)”
earlier in this section. If the tire pressure is
low, the low tire pressure warning light comes on.
See Tire Pressure Light on page 221.
CRUISE SET TO XXX
This message displays whenever the cruise
control is set. See Cruise Control on page 179 for
more information.
DRIVER DOOR OPEN
This message displays and a chime sounds if the
driver’s door is not fully closed and the vehicle
is in a drive gear. Stop and turn off the vehicle,
check the door for obstructions, and close the door
again. Check to see if the message still appears
on the DIC.
241
Page view 240
1 2 ... 236 237 238 239 240 241 242 243 244 245 246 ... 537 538

Comments to this Manuals

No comments