Saturn 2010 AURA User Manual download pdf (Page 310)

100

101

Notice: If the jumper cables are connected or

removed in the wrong order, electrical shorting may

occur and damage the vehicle. The repairs would

not be covered by the vehicle warranty. Always

connect and remove the jumper cables in the correct

order, making sure that the cables do not touch

each other or other metal.

A. Heavy, Unpainted Metal Engine Part or Remote

Negative (–) Terminal

B. Good Battery or Remote Positive (+) and Remote

Negative (–) Terminals

C. Dead Battery or Remote Positive (+) Terminal

To disconnect the jumper cables from both vehicles, do

the following:

1. Disconnect the black negative (−) cable from the

vehicle that had the dead battery.

2. Disconnect the black negative (−) cable from the

vehicle with the good battery.

3. Disconnect the red positive (+) cable from the

vehicle with the good battery.

4. Disconnect the red positive (+) cable from the other

vehicle.

5. Return the caps over the positive (+) and

negative (−) terminals to their original positions.

Headlamp Aiming

Headlamp aim has been preset at the factory and

should need no further adjustment.

However, if your vehicle is damaged in a crash, the

headlamp aim may be affected. Aim adjustment to the

low-beam headlamps may be necessary if oncoming

drivers ﬂash their high-beam headlamps at you

(for vertical aim).

If the headlamps need to be re-aimed, it is

recommended that you take the vehicle to your

dealer/retailer for service.

Jumper Cable Removal

6-40

1 2 ... 305 306 307 308 309 310 311 312 313 314 315 ... 427 428

Comments to this Manuals

No comments

Saturn 2010 AURA User Manual Page 310

Comments to this Manuals

Related products and manuals for Cars Saturn 2010 AURA